Alfatechnic Granulate Recycling Systems

1. Alfatechnic Conveyor Belt System

Alfatechnic Conveyor

A system designed to prevent granule flow problems beneath the grids, allowing the transported tonnage of the grit conveying system to be adjusted as needed. A standard system includes recycling bunkers, floor grids, and a drum motor for each belt movement. The Alfatechnic conveyor system, with minimum downtime coefficient, is a recycling system that reduces costs in blast cleaning facilities. Alfatechnic Conveyor System combines high-technology quality components into a durable, reliable, solid and cost-effective system. Alfatechnic Conveyor System is manufactured in custom dimensions suitable for existing or new blast cleaning chambers and is designed to fit the specifications of each project.

Alfatechnic Elevator

The process is completed when granule from the conveyor system is dumped into the elevator pit, and hardox-clawed buckets from the elevator pit pick up the granule, lift it to the required height and dump it into the separator inlet. The elevator bucket is included.

Alfatechnic Separator

A system that separates granule-dust mixtures and foreign materials from each other. Alfatechnic Separator is designed with rotating or flat screens. Through these screens, large particles are discharged from the system, while dust and granules are separated from each other by flaps and dust is removed from the system. Clean granule is accumulated in the Alfatechnic stock silo. It includes an air-washer that cleans the abrasive.

2. Alfatechnic Pneumatic Granule Recycling

The main objective of Alfatechnic pneumatic granule recycling system is to recover abrasive material accumulating on the floor. The system is used for granule recycling, storage, conveying and cleaning of existing granule needs. It is a specially designed system with low cost, efficiency and low maintenance cost. A6 pneumatic granule recycling systems meet all expectations with recovery capacity of up to 10 tons per hour from an average distance of 60-70 metres depending on material, and compact, solid and mobile design for the most demanding environments. The vacuum recovery system design is based on pneumatic conveying system. It uses high-speed air flow to collect all abrasive materials with a wear-resistant suction hose and transfers the collected granule to a cyclone silo. After separation of unusable granule and other foreign materials in the system, usable granule is conveyed to the blast cleaning tank. In granule recycling systems, quality material, quality workmanship and most importantly correct engineering are critical to the system's lifetime. The relevant standards are certified as TS EN 12100 and TS EN 60204-1.   Çiğdem Arslan Project Director Blast Cleaning and Painting Systems Alfatechnic Makina San. ve Dış Tic. Ltd. Şti.