Transparent Waterproofing Solutions

Kalekim, the leading brand in ceramic adhesives and grout sealants, offers İzopur Trans, a transparent waterproofing material that provides water protection on ceramic-covered surfaces without compromising aesthetics. Breaking ceramic tiles to apply waterproofing creates challenges in terms of time, additional costs and impacts on living comfort. Instead of this approach, it is possible to apply waterproofing with an appropriate intermediate layer over the existing ceramic coating using products and application solutions developed by Kalekim. Water accumulating on terraces and balconies due to rain and snow, despite adequate drainage measures, can seep through the floor concrete and cause various problems indoors. Similarly, insufficient slope in balcony and terrace concrete during building construction, lower application quality, undersized drainage pipes and similar issues can lead to water infiltration into the building over time. İzopur Trans, offered as a solution to these problems and easy to apply, is resistant to UV rays, water and frost, and does not yellow. Surfaces retain their aesthetic appearance while achieving long-lasting waterproofing, and at the same time remain easy to clean. With the transparent appearance of İzopur Trans, waterproofing for balconies and terraces covered with materials such as granite and marble—in addition to ceramic surfaces—can be provided without the need to break existing coatings. İzopur Trans, taking advantage of its transparent nature, is also used for protecting and waterproofing glass brick, natural stone, wood or bamboo surfaces.

Recommendations for best results

Application of the İzopur Trans System, which allows waterproofing over existing ceramics on balconies and terraces, should begin with 3455 İzopur Trans P, a ceramic surface primer. The existing ceramic surface to be applied must be clean, dry, sound and free of dust, dirt, oil and similar residues that would prevent adhesion, with surface moisture below 5%. The single-component, ready-to-use, easy and fast-applying 3455 İzopur Trans P increases the adhesive strength of the waterproofing material 3454 İzopur Trans to be applied over it on non-glossy and non-absorbent surfaces. 3455 İzopur Trans P should be applied to all surfaces with a clean, dry cloth.

Now for the application

3454 İzopur Trans, thanks to its special formula, is a polyurethane-based waterproofing material that can be applied over existing ceramic, tile and glass surfaces on balconies and terraces, providing waterproofing without requiring difficult renovation work such as removal or breaking. 3454 İzopur Trans should be applied in at least two coats with a brush or roller until all surfaces and joints are covered. The second coat should be applied 12 hours after the first coat application (no later than 18 hours). For better waterproofing and higher resistance to weather conditions, a third coat of 3454 İzopur Trans is recommended.