Mark 3 High Performance and Mark 3 LTE

24.03.2020

The Mark 3 Moisture analyzer has been stringently designed to reduce the uncertainties commonly associated with loss-ondrying analyzers. Integrating the most advanced temperature resistant electronic balance with a heating chamber designed for near zero heat induced pan lift and balance drift, the Mark 3 will increase the accuracy and precision for analytical results of your most demanding samples. These features make the Mark 3 a genuine alternative to Karl-Fischer titration. The Mark 3 is available in a High Performance and LTE version (standard). Features • Four parallel infrared quartz cylinders for heating. • Up to 4 heater modules per control unit. • Large sample capacity. • Superior inter unit correlation. • In-House testing. • Built-in internal printer. • Superior drift specifications. • Monolithic weighing cell. • Multiple modes of operation. • Dual temperature set point capability. • Moisture content from 0.001% to 99.999%. Applications • Plastics. • Pharmaceuticals. • Foods. • Chemicals. • Cosmetics. • Sugar. • Paints and coatings. • Pulp and paper. • Waste treatment. • Dairy. • Ethanol.

Benefits Four parallel infrared quartz cylinders give exact temperature control to +/-10C, fast ramp-up to proper temperature without overheating eliminating burning of your sample as well as fast cooling enabling shorter times between tests. Up to 4 heaters per control unit, adding 1 to 3 additional heater modules allows you to increase your throughput in testing. All heater modules correlate to each other, ensuring your results are consistent among several units. No need to settle for “close enough”results. Superior drift specifications – monolithic weigh cell and chamber design minimizes the drift, providing for more accurate results. Standard modes of operation include % Moisture, % solids and syringe mode for testing volatiles, TGA mode for Free and Bound moisture, and extrapolation mode which allows us to shorten test times while giving fast accurate answers.

Applications Development and Support

When you purchase a Mark 3 series unit, Sartorius will test your sample and develop a program that correlates to a Standard Reference Method. This service is offered at no charge. Currently we have tested and designed programs for over 10,000 materials.